|
|
Spedo
2300 Forms Cutter
 Advantages
of the Spedo 2300
- Outstanding flexibility for operator programming, i.e. line
feed choices of 1/6, 1/8, 1/10, 1/12 and 1/16th plus metric
sizes and A4.
- Cut for lengths 1/16th inch minimum to 13 feet 10 inches
long maximum.
- Strip cuts or chip outs in multiples of 1/16, 1/12, 1/10,
1/8, or 1/6th.
- Enhanced job programming and multi formatting with maximum
10 different form lengths before repeating combining all line
feeds and chip out sizes. Choice of 30 pre programmed jobs as
standard.
- Machine all electronic. The blade is driven by a servomotor
not an electro-mechanical clutch.
- Three motor drive. One servo for paper feed, one for blade
function and the third motor for margin trim drive.
- Servomotors and drivers have proven reliability,
manufactured to special order for Spedo.
- Electronic control chassis mounted on rubber to resist the
effects of vibration.
- Adjustable feet and forms counter fitted as standard.
- Splined tractor shaft for maximum accuracy.
- High speed shaft bearings are sealed ball race type and the
tractor feed shaft is fitted with a centre bearing to maintain
alignment.
- Heavy duty powder coat.
- Special functions, i.e. no blade operation where the cutter
is used to pull forms for inkjet application without cutting.
Pause and batching.
- Sleep mode and variable speed Margin Trim Drive for longer
blade life.
- Choice of Kick-out roller or strip cut plate, both to Health
& Safety Standards.
- Low power consumption, reducing carbon footprint compared to
other cutters.
2300 | Specifications
| Advantages |
Performance | Cost |
Brochure
|
|
